Polybind Extra Performance Adhesive (Small)

Titebond PROvantage Landscape Adhesive in 10 ounce tubes is a stocked product at our store.

Titebond PROvantage Landscape Adhesive is a waterproof, professional grade construction adhesive that prevents wall shifting or loosening due to seasonal changes. This adhesive bonds most common building materials including brick, stone, concrete, metal, wood, timber and slate.

Titebond PROvantage Landscape Adhesive is ideal for repairing loose blocks, bricks or stone. It may be used under a variety of temperature conditions ranging from sub-zero temperatures to extreme summer heat. This VOC-compliant adhesive provides great flexibility, bridges gaps and extremely effective when bonding irregular surfaces.

Ideal For: Installation of landscape materials for retaining walls, capstones, planters and walkways.

Bonds: Wood, brick, stone, concrete, metal, timber, and slate.

• Waterproof
• Permanent bond
• Prevents wall shifting
• Extrudes 0F - 100F
• Wet & frozen lumber
• VOC-compliant

COVERAGE (MAXIMUM): APPROXIMATE LENGTH OF BEAD ACCORDING TO BEAD DIAMETER

Application Temperature

0F to 110F

Service Temperature Range

-20F to 120F

Method of Application

Cartridge/caulking gun

Working Time

Approximately 20 minutes for a 1/4 bead.

Cleanup

Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendors precautions.

Working Surfaces

Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.

Not designed for continuous submersion. Do not use on vinyl-coated drywall, polystyrene foam or rigid plastics. Do not adhere one non porous material to another as this will slow or prevent drying. If applied to moist block, cure time will be extended until blocks dry. Please continue to brace until the blocks are completely dry.

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains methyl acetate, oxidipropyl dibenzoate and residual vinyl acetate. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persist. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.