Avante Ashlar, another innovative introduction by Unilock, features a unique ashlar design with a random appearance.
Each Avante Ashlar stone unit incorporates several random shapes with varying textures into one module, giving you a unique natural stone appearance. The exclusive “L” shaped design promotes installation accuracy and lock-up integrity.
Shapes & Sizes

Unit A
48.5 cm x 29.1 cm x 7 cm
19" x 11.25" x 2.75"

Unit B
48.5 cm x 29.1 cm x 7 cm
19" x 11.25" x 2.75"

Unit C
48.5 cm x 29.1 cm x 7 cm
19" x 11.25" x 2.75"

Unit D
48.5 cm x 29.1 cm x 7 cm
19" x 11.25" x 2.75"
Jointing Compound - Small detail, Big difference
To add the finishing touches on your project experiment with the different sand options below. Different sand colors can have a significant impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with the different sand color options below for Avante Ashlar. By clicking the different sand colors the joints will change in the image on the left. Click the image to see a larger version



Features
Technologies
EnduraColor™ Plus
Surface Texture
Flagstone
Applications
Pedestrian
Residential Vehicular
Patterns
Packaging
Unit Thickness | Sq. Ft. Bndl. | Units Sq. Ft. | Lbs Bndl. | Units Bndl. | |
Random Bundle | - | 90.75 | - | 2883 | - |
Unit A | 7 | - | 0.71 | - | 24 |
Unit B | 7 | - | 0.71 | - | 16 |
Unit C | 7 | - | 0.71 | - | 8 |
Unit D | 7 | - | 0.71 | - | 16 |
Additional Avante Ashlar™ Information
All colors are sold in full bundles only. This material is packaged on a refundable skid. Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing.
Important Information
Avante Ashlar, another innovative introduction by Unilock, features a unique quarried stone pattern with a random appearance. Each Avante Ashlar stone unit incorporates multiple shapes with varying textures into one module. The exclusive "L" shaped design promotes installation accuracy and lock-up integrity.
Base Requirement & Bedding Course – standard paver or open-graded base specification.
Handling and Installation– A protective pad is required when doing the final paver compaction. Automatic random pattern is generated. Install from several pallets to get best color mixing.
Jointing Material and Joint Stabilization
- Better: Any Polymeric Sand or ordinary dry joint sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. (Joints should be flooded but the paver surface must be squeegeed and/or blown clean).
- Best: Unilock EasyPro™
Sealers
- Product may be sealed but it is not absolutely required
- Unilock Unicare®, Surebond, BP Pro and Techniseal® sealers can be used.
- Select type for desired aesthetics.
- Product must be cleaned before sealing
Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.
Special note - To avoid issues with height variance, do not use as a direct overlay on concrete.